9
5. Installa0on Instruc0ons – Moun0ng
THIS ALARM MUST BE INSTALLED BY A COMPETENT PERSON AND IS TO BE INSTALLED
ACCORDING TO THESE INSTRUCTIONS
Wall-moun0ng (recommended by the manufacturer, if possible)
1. Drill two holes in a wall 7.8 cm apart (you may wish to use the back-plate for
guidance)
2. Insert the two rawl-plugs, that are supplied, into the holes
3. Insert the two screws as supplied into the holes ensuring enough of the screw s1cks
out of the wall (approx. 3mm)
4. Hook the alarm over the screws
Free-standing
ALWAYS BE CAREFUL TO LOCATE A FREE-STANDING ALARM WHERE IT IS UNLIKELY TO BE
KNOCKED TO THE FLOOR, AND IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS -
RECOMMENDED LOCATIONS SECTION.
Ensure free-standing alarms are placed in the upright posi1on, and not lying flat on a surface.
2532-7202-10_5CO_ASH:_ 2018.10.26 5:42 PM Page 9
