© 2017 UTC Fire & Security. All rights reserved.
6 / 6
2017-10-13
Submenu 9
- Turns ON/OFF the backlight in idle mode, buzzer on key press, parity bit.
Reset Master Code
1. Disconnect Power
2. Press and hold “A” and reconnect Power.
3. Hold the “A” Key for at least 3 seconds.
Default Master Code:
000000
Manufacturer
UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Rd., Arden Hills, MN 55112-6943, USA
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Version
This document applies to
ACL805SUW-RDMF
hardware
Certification and Regulatory
information
This product herewith complies with requirements of EMC directive 2014/30/EU, Radio Equipment Directive
2014/53/EU. In addition it complies with RoHS directive EN50581:2012
Contact information
https://firesecurityproducts.com
Product Warnings
and Disclaimers
THESE PRODUCTS ARE INTENDED FOR SALE TO, AND INSTALLATION BY, AN EXPERIENCED SECURITY
PROFESSIONAL. UTC FIRE & SECURITY CANNOT PROVIDE ANY ASSURANCE THAT ANY PERSON
OR ENTITY BUYING ITS PRODUCTS, INCLUDING ANY “AUTHORIZED DEALER”, IS PROPERLY
TRAINED OR EXPERIENCED TO CORRECTLY INSTALL SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and product safety information, please check
https://www.utcfssecurityproducts.eu/productwarning/ or scan the following code:
