6
48/50N INSTALLATION
The 48/50N units use multiples of the CRSOUNBLN001A00
kit, one per compressor.
1.
Remove security grilles or louvers from condenser section
if present.
2.
Access compressor from both sides of unit. See Fig. 15.
3.
Wrap the sound blanket around the compressor in clock-
wise direction. See Fig. 5.
4.
Align the slots in the blanket with the suction tube on the
compressor. See Fig. 5.
5.
Secure the blanket near suction tube with the hook and
loop strips. See Fig. 5.
6.
Wrap the blanket around the compressor terminal box See
Fig. 6.
7.
Attach the hook and loop strips on the vertical seam to
secure the blanket to the compressor. See Fig. 6.
8.
Attach top flap of blanket with the hook and loop strips
while aligning the discharge opening with the discharge
line. See Fig. 7.
NOTE: All wires pass under the blanket.
9.
Repeat Steps 3 through 8 for installation of sound blankets
on all compressors.
10. Replace the compressor access panels and security grilles
where used.
Fig. 15 — 48/50N Units Compressor Access
a48-8749
Summary of Contents for Carrier CRSOUBLN001A00
Page 7: ......
