2
Fig. 1 — 48P030,035 Compressor Access
Fig. 2 — Compressor Access, 48/50P 040,050 Sizes
Fig. 3 — Compressor Access Panel,
48/50P 055,060 Sizes Shown
Fig. 4 — 48/50P 070-100 Sizes
2.
Wrap the sound blanket around the compressor in clock-
wise direction. See Fig. 5.
3.
Align the slots in the blanket with the suction tube on the
compressor. See Fig. 5.
4.
Secure the blanket near suction tube with the hook and
loop strips. See Fig. 5.
5.
Wrap the blanket around the compressor terminal box. See
Fig. 6.
6.
Attach the hook and loop strips on the vertical seam to
secure the blanket to the compressor. See Fig. 6.
7.
Attach top flap of blanket with the hook and loop strips
while aligning the discharge opening with the discharge
line. See Fig. 7.
NOTE: All wires pass under the blanket.
8.
Repeat Steps 2 through 7 for installation of sound blankets
on all compressors.
9.
Replace the compressor access panels and security grilles
where used.
CONTROL BOX
COMPRESSOR
ACCESS
PANEL
(END OF UNIT)
a48-8652
COMPRESSOR
ACCESS PANELS
COMPRESSOR
ACCESS PANELS
A48
-8643
Summary of Contents for Carrier CRSOUBLN001A00
Page 7: ......
