6
© 2021 United States Stove Company
ASSEMBLY INSTRUCTIONS
INITIAL ASSEMBLY
1. Remove the Ash Vacuum from the box.
2. Unlock the latches and remove the power head lid.
3. Remove the contents from inside the container and
make sure you have all the parts listed in the “Getting
To Know Your Ash Vacuum” section of this manual.
4. Place the pre-filter over the tanks as previously
installed. Replace the power head lid on the container
and secure the lid with the latches.
5. Insert the locking end of the hose onto the vacuum
port and rotate 1/4 turn counter-clockwise.
6. Insert the metal nozzle onto the other end of the hose.
7. Plug in the power cord and turn the vacuum cleaner
power switch on.
8. Run the unit for 30 seconds after you have finished
cleaning your stove or fireplace to ensure all materials
are safely captured in the container.
POLARIZED PLUG
To reduce the risk of electrical shock, this appliance has
a double polarized plug (one with the blade wider than
the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician
to install the proper outlet. Do not change the plug in any
way.
WARNING!
BE SURE TO READ, UNDERSTAND, AND
APPLY INFORMATION, ENTITLED ‘SAFETY
INSTRUCTIONS & WARNINGS’. DO NOT VACUUM
IN AREAS WITH FLAMMABLE GASES, VAPORS,
OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE
GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED
TO; LIGHTER FLUID, SOLVENT TYPE CLEANERS,
OIL-BASE PAINTS, GASOLINE, ALCOHOL OR
AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE
BUT ARE NOT LIMITED TO; COAL, MAGNESIUM,
GRAIN OR GUN POWDER. TO REDUCE THE RISK OF
HEALTH HAZARDS FROM VAPORS OR DUST, DO
NOT VACUUM TOXIC MATERIALS.
