User Confi gerable Settings
17
User Settings Explained
System Time
The
fi
rst setting in the user’s con
fi
guration menu is for setting the system
time. Pressing ‘Temp Up’ will display the
fi
rst setting, the Hour Setting. The
system time is reset to the default of 12 PM whenever the units’ power is
reset. Pressing ‘Temp Up’ will cycle from 12 AM (‘12:A’) to 12 PM (‘12:P’).
Pressing ‘Temp Down’ takes you to the second setting, the Minutes Setting.
Pressing ‘Temp Up’ will cycle from ‘--:00’ thru ‘--:59’.
Filter Cycle Duration
The
fi
ltration cycle duration setting can be set from 0 Hours to 12 Hours.
It is during these
fi
ltration cycles that the control will run the spa’s ozonator,
if one is installed. If set to zero there will be no
fi
ltration cycles, while setting
between 1-12 will set the duration of each
fi
ltration cycle accordingly. The
factory default
fi
lter cycle duration is 2 hours per cycle.
Filter Cycle 1 - Start Time
Filter Cycle 1’s Start Time (‘FC-1’) sets the hour of day the
fi
rst
fi
ltration
cycle starts. Pressing ‘Temp Up’ will show the currently set start time, which
can be set from 12 AM to 12 PM (or Off for no cycle) by pressing ‘Temp
Up’. The factory default start time for the
fi
rst daily
fi
ltration cycle is 6 AM.
Filter Cycle 2 - Start Time
Filter Cycle 1’s Start Time (‘FC-1’) sets the hour of day the
fi
rst
fi
ltration
cycle starts. Pressing ‘Temp Up’ will show the currently set start time,
which can be set from 12 AM to 12 PM (or Off for no cycle) by pressing
‘Temp Up’. The factory default start time for the second daily
fi
ltration cycle
is 6 PM.
