DNx-AI-208 Analog Input Layer
22
Tel: 508-921-4600
www.ueidaq.com
Vers:
4.6
Date: November 2013
File:
AI-208 App A.fm
© Copyright 2009
United Electronic Industries, Inc.
shows the physical layout of the STP-AI-208 board, indicating where
you should install bridge completion resistors or resistor divider packages, if
required for your application. It also shows which terminals to use for making the
strain gauge connections for a typical channel.
Figure A-6. Physical Layout of STP-AI-208 Board
Solder terminals
for external trigger
Solder terminals for
SOT23 divider
Solder terminals for
bridge completion
resistors
Jumper
for Ch 3
PSn+
Pn+
Sn+
Sn-
AGND
Ch.1
Plug into
Mating
Connector
on AI-208
Layer
Ground for
connector shield
connection
