WirelessHART Toxic & Combustible Gas Detector
IM_TCD60-01
www.ueonline.com/vanguard
6
2.0 INSTALLATION
2.1 Battery Installation
Only battery packs provided by United Electric Controls are compatible with this device.
Battery should be removed and stored when the device is not in use.
Batteries are not rechargeable.
The battery pack contains two Lithium-Thionyl Chloride D size cells, with a nominal output voltage of 7.2V.
1. Unscrew the solid, back cover from the intrinsically safe battery compartment and set aside.
2. Remove the battery pack from its packaging.
3. Align battery pack so connection on the pack lines up with connection in the enclosure.
4. Slide the battery pack into the enclosure until it latches in place as shown in Figure 5.
5. The device is now powered and will show the word STARTING along with the hardware and software ver-
sions on the front panel display while initial boot-up completes (see Figure 6).
S T A R T I N G
HW VER : X.XX
SW VER : X.XX
Figure 6
Figure 5
