Installation, Operation and Maintenance Manual
Marvel BMS
3
Subject to change without notice.
120.5-IM (0419)
General Purpose
The Marvel BMS communications availability is designed to
give a general control and monitoring ability to any of the
Marvel controllers� It is not designed to control the actual
individual components of the units� The Marvel controls
program is designed to maximize efficiency of the unit and
will follow through with its own sequence of operations�
The BMS communications can be used on all of the existing
Marvel controllers and although some may have more ability
than others they all have ability’s that are most commonly
associated with a BMS management system such as system
on off, Alarm monitoring, status monitoring, conditions
monitoring, and set points access�
All Marvel equipment can communicate via Bacnet, Modbus,
and LonWorks� All controllers require a serial communications
card which is not a standard option for a Marvel controller
to communicate to a BM system� The only exception is the
Marvel controllers utilizing the pCO 5 controller� The pCO
5 controller can communicate via Modbus without a serial
card� All other types of BMS communication will require a
serial card for the pCO 5�
NO BMS HERE
BMS GOES HERE
