14
4. Installation
4.1 Tools & Parts Required for Installation
Prior to mounting, determine the location of an acceptable mounting support. All charging
station products must be anchored into a mounting support such as a 2” x 4” stud or a solid
concrete wall.
DO NOT
mount this unit directly to a stucco/drywall/wall board.
Tool
Size
Source of Supply
Remark
Mounting Bracket
Back Plate
Screws (x2)
Holster
Screw (x4)
Holster
Anchors (x4)
EasyEvPlug
™
Holster/Tesla Holster
Front Pate
Screws (x4)
Allen key
Screwdriver
10 x 5.8 x 1.4 in
(255 x 48 x 36 mm)
#14
#8
1-1/4”
#8
5/16” x 1/2”
PH3
5/32”
Included with Product
Included with Product
Included with Product
Included with Product
Included with Product
Included with Product
Commercially
Available
Commercially
Available
For mounting the charging
station to the wall/structure
For installing the Mounting
Bracket to the wall/structure
For installing the
EasyEvPlug
™
to the wall/
structure
For installing the
EasyEvPlug
™
to the wall/
structure
To store the EV charging Plug
and Cable
For securing the charging
station to the Mounting
Bracket
For Charging Station Cover
Screws
For optional
Hardwire Install
Allen key
3/16”
Commercially
Available
For installing the enclosure
plate to the back of the
station body.
