z
TECHNICAL SPECIFICATION
z
+91 94273 01436
Sales:
Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end
versal
nology”
Uni
Tech
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
Model No. : UT-1405
PAGE : 3
FDA 21 CFR part 11 - GAMP-4 compatible.
LEDs. S
both
Microcontroller based indicator with inbuilt Temperature & DP measurement in single enclosure.
Incorporates highly stable built-in or Remorte Temp. & DP sensor.
3 Digit, 0.56" bright LED display for displaying Temperature and DP
Process parameter Hi and Low
tatus indication For
channel.
User selectable set limits for process value violation.
Inbuilt buzzer to audible process value violation.
Password protection for calibration and programming mode.
Software Calibration for both channels.
MODBUS RTU multi drop RS-485 serial communication for PLC, SCADA, etc.
Programmable devise address, baud rate, (max no. of device is 1-256).
Remote programmable from master device.
User programmable offset correction.
Compact, All Stainless Steel enclosure with 35 mm depth for installation in prefab panels.
Brick and modular wall mounting and flush mounting.
FDA21 CFR part 11 compliance data logging software available
Ex. Flameproof model available for Hazardous applications.
Technical Specification
Flame
Proof
Material of constructions
Cable entery
Gas group
Enclose certification
Display glass
Degree protection
I IIA IIB as per IS 2148/1981
Enclosure is certifies by C.M.R.I. dhanbad
Clear glass thognet type A as per Is 2206
IP 65 as per IS 2147
5 x 3/4 “ ET
Aluminum alloy
Technical data
Nos. of input
Input
Indication
Range
Accuracy
Transmitter power supply
Comunication
Programmable
Parameters
Other
Supply voltage Power consumption
24 v DC @ 4 watts maximum
Operating ambient temperature and humidity
Temperatures input
2 nos .(TEMP + DP)
- 0~50 °C
- Below 90%, non condensing
Mounting
Bricks and modules wall Flush panel mounting.
DP input
Integral Or Remote (external)
Integral Or Remote (external)
24V/5V DC @ 30 mA max, isolated from I/p & O/P.
Temperatures
DP
Channel-1 : 3 digit Seven segments 0.56” RED display.
Channel-2 : 3 digit Seven segments 0.56” RED display.
LEDs for visual alarms, Buzzer for audible alarm, LED for 485-comm.
Temperatures
0 to 60.0 *C with decimal point.
Display Resolution
Temperatures
0.25 % on FS
Response time : 8 sec
Status indication
Read /write parameter
Read: Procces value ,decimal point. Write: Hi Low set point.
Programmable parameter
Modbus RTU RS- 485 Isolated communications.
Baud rate , Parity , Node address , stop bit.
Communication Protocol
Full range as per input selection.
Programming of parameters
Through 4 tactile keys (with password protections)
No. of slave ID
Total 1-256 unit.
Alarm logic
Full Scale HI OR Full scale Low
MOC
Full S S 316 plate and box , back side wall mounting M S covers.
Set point / High scale / Low scale
-10 to 10 mm / -25 to 25mm / -100-100 mm /-200 to 200 mm wc
mm wc : 0.1 / PA : 1 / Hpa :0.01
1 % on FS in all unit
Response time : 1 sec
DP
DP
Summary of Contents for UT-1405
Page 12: ......
