7
driver’s door only when disarming the security system. Pushing the
button a second
time within 3 seconds will unlock the other doors.
AUTOMATIC RE-ARM:
If this feature is selected, the security system will automatically
re-arm itself in 60 seconds after disarming with remote transmitter. Automatic rearm will
cancel if any door is opened before the 60 seconds timer has elapsed.
H. DISARMING WITHOUT A TRANSMITTER
OVERRIDES THE ALARM WITHOUT PASSWORD PIN CODE:
(Factory Default
Setting)
The Override function may be used if the remote transmitter is lost or inoperative.
1. Enter the vehicle and turn the ignition switch to the 'ON’ position.
2. (Alarm will sound.)
3. Within 10 seconds push and release the valet switch. The alarm will stop sounding and
enter the disarm mode. You can now start and operate the vehicle normally.
OVERRIDE THE ALARM WITH PASSWORD PIN CODE:
Unlike valet switch that can easily be found and defeated, this security system allows
the consumer to program a password pin code offering a higher level of security.
1. Enter the vehicle and turn the ignition switch to 'ON’ position. (Alarm will sound.)
2. Within 5 seconds, enter your chosen first digit code by pressing and releasing the Valet
Switch. 3. Within 15 seconds of the last digit code enter (the 1st code), then turn the
Ignition Switch “OFF” and then“ON”.
4. Within 15 seconds, enter your chosen second digit code by pressing and releasing the
Valet Switch.
5. Turn the ignition switch “OFF” position. 4 Chirps from siren/horn and 4 flashes from the
parking light indicate the system has disarmed.(When finished above procedures,
system's siren will stop alarming, lights will stop flashing, but the vehicle can’t be
started.)
Note:You must override the alarm within 60 seconds. If not, the system will automatically
re-arm.
EXAMPLE: To Override the System with the Password Code 83,
1. Enter the vehicle and turn the ignition switch to the 'ON’ position.(Alarm will sound.)
2. Within 5 seconds, Press and Release the Valet Switch 8 times,
3. Within 15 seconds of entering the last digit code enter (the 1
st
code), turn the Ignition
Switch “Off” and then“ON”.
4. Within 15 seconds, Press and Release the Valet Switch 3 times.
5. Turn the Ignition Switch to the “Off” position. 4 Chirps form siren/horn and 4 flashes
from the parking lights will indicate the system has disarmed.
I. VALET MODE:
VALET MODE: (System is in Disarm Mode )
The valet switch allows you to temporarily bypass all alarm function, eliminating the
need to hand your transmitter to parking attendants or garage mechanics. When the
