- 40 -
Read RFID Tags
1. Start Reads : Start/Stop reading
2. Ready : Module status
3. Tag Read Coverage : Antenna power
4. Home : Return to the main page
5. Exit : Exit application
And setup the setting like below
Tag Selection : On EPC
Selection Address : 1
Selection Mask : 12
Select Tags not matching mask : Unchecked.
Then it will only show the tag “1234 0000
0000 0000 0000 0000”
If Select Tags not matching mask is checked.
It will show the tag “5678 0000 0000 0000
0000 0000”
7. Save : Save the setting
8. Cancel : Exit this page without saving
9. Restore Defaults : Restore the setting
