MSR206 Programmer’s Manual
UDN PM017-U Rev.C.1
Section 5 – Utilities test program
2003/10/9
Page
6
Total
28 pages
Section 5 Utilities test program
Every MSR206 comes with a utilities test program disk that includes a
Windows
version. This program is to verify and
demonstrate the functionality of the MSR206. In some cases, it can be used as a card reading and writing program.
System requirement
a. 80286 PC/AT compatibles or later model with color display.
b. Either the following operating systems: Windows 95, Windows 98, Windows 2000, or NT4.0.
c. 256K available conventional memory.
d. A free serial port (Com 1 or Com 2) with DB9 male connector.
Test program installation
User shall follow the steps below in order to install test program
A. Connect MSR206 to RS232 port, and power on it.
B. Insert utility diskette into floppy disk drive on PC, and execute the self-extracting file (e.g.: MSR206.exe)
C. Execute test program from the subdirectory of ‘Demo AP’ (e.g. 206DDX21.exe)
D. The test program will auto-detect communication port. If there is any errors occurred, it’ll appear in the
information dialog box after opening the program. User can close the AP by pressing OK button.