MSR206 Programmer’s Manual
UDN PM017-U Rev.C.1
Table of Contents
2003/10/9
Page
1
Total
28 pages
Section 1 Introduction
Thank you for purchasing the MSR 206 Manual Swipe Magnetic Card Reader/Writer. It is ideal for access control, time
keeping, banking, ID recognition & credit verification and related applications. In fact, wherever a magnetic stripe ID
or transaction card is used, one can find a related use for the versatile, user-friendly MSR206 reader/writer.
The MSR 206 is designed to offer a reading and writing solution of high and/or low coercivity cards that will
attractively complement an existing system.
This manual provides detailed information about the MSR 206. For ease of installation and programming use, we have
addressed everything from its attractive features to its various configurations.
When designing the MSR 206, we selected what we feel are the most useful features and functions. If in some cases
you find that your specific needs differ from our existing products, we welcome your comments and suggestions.
Custom-designed models are also
available.
This MSR206 series has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
This MSR206 series also had been tested and found to comply with the agency requirements of specification for CE
mark Class B
EN 50 082-1: 1992
EN 55 022: 1994 Class B
IEC 801-2: 1984
EN 61000-3-2: 1995 Class A
IEC 801-3: 1984
EN 61000-3-3: 1995
IEC 801-4: 1988
Accessories of MSR206
Make sure all the following accessories are contained in your package:
1. Switch power Supply, AC 110~240V in / DC 24V, 2.2A out.
2. Power cord.
3. Signal cable (DB9 to RJ45, 1.5m)
4. Utility disk (A/P S/W).
5. Blank Hi-Co test card.(or and Low-Co test card)
6. Programmer’s manual
Warranty
One year after purchase of MSR206, any alteration and/or erasure or modification of the MSR206 will void the
warranty.