MSR120 Programmer’s Manual UDN PM010, Rev. 1.1
Section 1 -- General Description 2003/1/21
Section 1 General Description
This section presents general information about the basic characters of the MSR120.
!"
Features
The MSR120 provides the following features:
1 Light weight: 120g
2 Compact size: 100L*34W*28H (mm)
3 LED and Buzzer indicators indicate card status
4 Low power consumption
5
Single, dual, or triple track versions allow for reading all types of magnetic cards, including credit cards and
drivers licenses.
!"
Application
This Magnetic Stripe Reader is design to read high or low coercive magnetic cards. It can decode/verify up to 3
tracks of data simultaneously. This product communicates with a host computer or other terminal using a standard
USB interface. Because of the transmitting protocol of MSR120 is more precise, it is suitable for using in financial
industry.
!"
Function
Self Test
Whenever the reader experiences a reset cycle, a self-test is performed. The reader will respond with “:” and the
LED will turn green if the entire test is successful. Otherwise, the LED will turn orange and no response will be
generated.
Table 1-1. Self Test
Indication
LED
Buzzer
Cause
Post Condition
Green
1 Beep
Test Success
Responds with “:”
Orange
EEPROM Failed
Hang
Orange
Internal ROM Failed
Hang
Transmission Reset by Hardware
When the reader cannot communicate with the host, user can set the switch S1-1 on and power on the reader. The
reader will beep twice and response the baud rate, parity, CTS and RTS default setting, but the data inside
EEPROM will not be changed.
Page 1-
1
Proprietary and Confidential
Total 36 pages