MSR120 Programmer’s Manual UDN PM010, Rev. 1.1
Section 5 – Configuration Commands 2003/1/21
JHx (4Ah 48h x)
!
Set JIS Read Head
x = E(45h enable) or D(44h disable)
Table 5-8. JIS Read Head Setting
Command Form (Hex)
JIS Read Head
09h 00h 03h 4Ah 48h 44h 4Ch Without (default)
09h 00h 03h 4Ah 48h 45h 4Dh
With
p1
data
(70h 31h
data
)
!
Set Track 1 Prefix Code
1 Prefix can be set as 1-6 characters
2 If first character = 00h, prefix code of track 1 will not be send. It means this function is disabling.
Table 5-9. Set Track 1 Prefix Code
Command Form (Hex)
Track 1 Prefix Code
09h 00h 03h 70h 31h 00h 4Bh
Disable (default)
Example of Track 1 Prefix Code Setting
09h 00h 00h 46h 41h 0Ah 04h
One character: 0Ah
09h 00h 05h 70h 31h 54h 4Bh 01h 53h
Three characters: 54h 4Bh 01h
p2
data
(70h 32h
data
)
!
Set Track 2 Prefix Code
1 Prefix can be set as 1-6 characters
2 If first character = 00h, prefix code of track 2 will not be send. It means this function is disabling.
Table 5-10. Set Track 2 Prefix Code
Command Form (Hex)
Track 2 Prefix Code
09h 00h 03h 70h 32h 00h 48h
Disable (default)
Example of Track 2 Prefix Code Setting
09h 00h 00h 46h 42h 0Bh 06h
One character: 0Bh
09h 00h 05h 70h 32h 54h 4Bh 02h 53h
Three characters: 54h 4Bh 02h
p3
data
(70h 33h
data
)
!
Set Track 3 Prefix Code
1 Prefix can be set as 1-6 characters
2 If first character = 00h, prefix code of track 3 will not be send. It means this function is disabling.
Table 5-11. Set Track 3 Prefix Code
Command Form (Hex)
Track 3 Prefix Code
09h 00h 03h 70h 33h 00h 49h
Disable (default)
Example of Track 3 Prefix Code Setting
09h 00h 00h 46h 43h 0Ch 00h
One character: 0Ch
09h 00h 05h 70h 33h 54h 4Bh 03h 53h
Three characters: 54h 4Bh 03h
Page 5-3
Proprietary and Confidential
Total 36 pages
