43
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co.,Ltd
MS912+ User’s Manual
4.3.2.1 Batch mode - Data Format /
Date & Time Setup
DATA FORMAT
Note
：
[For memory version only]
The default Data Format is <Date>, <Time>, <Barcode Data>
below are items and their setup codes:
Code Item
2
Date
3
Time
4
Barcode Data
Example:
To change Data Format to <Barcode Data>, <Date>, <Time>
1. Scan [Data Format]
2. Scan [4], [2], [3] from
Appendix A -- numeric bar codes
3. Scan [Data Format]
FIELD SEPARATOR
Default is comma ( , ) . You may replace it with any alphanumeric characters
from the full ASCII table.
(Appendix B)
Example:
To change Field Separator to Semicolon ( ; )
1. Scan [Field Separator]
2. Scan [ ; ] from the full ASCII table
(Appendix B)
3. Scan [Field Separator]