Unitech MS912, User Manual

Page: 48 / 109

- 42 -
Memory Mode - Data Format, Date & Time Setup
DATA FORMAT
For memory version only
ENABLE MEMORY
. R011$
The default Data Format is <Item No.>, <Date>, <Time>, <Barcode Data>
below are items and their setup codes:
Code Item Code Item
1 Item No. 4 Barcode Data
2 Date 5 Quantity
3 Time
Example:
To change Data Format to <Barcode Data>, <Quantity>, <Date>, <Time>
1. Scan [Data Format]
2. Scan [4], [5], [2], [3] from page 8
3
3. Scan [Data Format]
FIELD SEPARATOR
. R010$
Default is comma ( , ) . You may replace it with any alphanumeric characters
from the full ASCII table in User’s Manual (on CD).
Example:
To change Field Separator to Semicolon ( ; )
1. Scan [Field Separator]
2. Scan [ ; ] from the full ASCII table (page 7
7
-8
3
)
3. Scan [Field Separator]