- 27 -
© 2019 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS852Plus User’s Manual
3.3.4 Code 93
Code 93 On*
Default All Code 93 Settings
Code 93 Off
3.3.4.1 Code 93 Message Length
Scan the bar codes below to change the message length. Refer to
for additional information. Minimum and Maximum lengths
= 0-80. Minimum Default = 0, Maximum Default = 80.
Minimum Message Length
Maximum Message Length
3.3.4.2 Code 93 Append
This function allows the scanner to append the data from several Code 93 bar
codes together before transmitting them to the host computer. When this
function is enabled, the scanner stores those Code 93 bar codes that start with
a space (excluding the start and stop symbols), and does not immediately
transmit the data. The scanner stores the data in the order in which the bar
codes are read, deleting the first space from each. The scanner transmits the
appended data when it reads a Code 93 bar code that starts with a character
other than a space. Default = Off.
Off *
On