Note: 1. See user manuals for more information. 2. For better readability, please print this document with laser printer. 3. Version: MS351QGENV1.2.
Pair the scanner with cradle
1. Make sure that both the handheld unit and the cradle are in normal working mode. You can see only the blue
LED on the cradle is ON.
2. Use the scanner to scan the MAC address at the bottom of the cradle. At the same time, the scanner will make
a beep-beep-beep sound.
3. Once the connection is done, the scanner can be used directly. If the attempt of connection fails, the scannerl
will make a beep-beep sound, and the red LED on the scanner will blinks 2 times, and then turns off.
4. If you want to disconnect, you can scan the barcode below:
Initialization settings and information display
Quick setting
1. Keyboard layout (USB interface)
USA （default）
Turkish F
Turkish Q
French
Italian
Spanish
Slovak
Denmark
Japanese
German
Belgian
Russian
Czech
Alt+ keypad
Alt+ keypad
: the scanner will output code result as pressing Alt+ numeric key (on keypad). Note that the Num
Lock control key must be ON. This setting can be specially adapted for use with different national keyboard
layout.
2.Bluetooth mode
HID mode
SPP mode
Cradle mode*
3.Scan mode
Good-read off
Momentary*
Alternate
4.Add suffix
Enter (default)
Tab
Note: If the reader USB input too fast causing the host can not normally receive data, please scan the
barcode below:
Note: The factory default settings are indicated with asterisks (*).
Some parameters of handheld unit return to default setting All parameters of handheld unit return to default setting
Return to default setting of cradle
Handheld unit firmware version display
Cradle firmware version display
Bluetooth version display
Bluetooth MAC address display
Bluetooth name display
