6
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Turning the MR650 on for the First Time
After you have initially charged your device for about 22 hours, the device is ready to be used. You can
now start up your device where you’ll calibrate the display, and set up the system time zone, date and
time.
Powering On
The MR650 automatically powers-on when the 12V DC power adapter is plugged-in. The MR650 wel-
come screen appears followed by the Windows CE screen.
Calibrating the MR650 Screen
The calibrate screen automatically appears when the unit is powered-on for the first time or after the
system is reset.
The MR650 prompts you to cali-
brate the unit by tapping a
sequence of screen locations.
Tap gently but firmly with the
stylus.
When you have completed the
series of taps, press the [E] key
to confirm calibration or press
the [ESC] key to cancel it.
After confirming calibration, the
Date/Time Properties screen
appears prompting you to set the
date and time.
Setting the Date and Time
In the Date/Time Properties window, use the
stylus to select the current date and time, time
zone, and daylight saving time option.
•
Tap the Left or Right arrows to scroll
the year and month you desire or
directly tap location of year or month
to change the year or month setting.
•
Tap on the Hr/Min/Sec AM/PM to
input the Hr/Min/Sec to set the time.
•
Tap the arrow and set the correct time
zone from the drop-down list.
•
Check the box to enable Windows to
automatically adjust for daylight sav-
ing.
•
Tap
OK
to save the settings and exit
the Date/Time Properties dialog or tap
X to exit without saving.
NOTE:
To change the time and date
at any time tap
→
Set-
tings
→
Control Panel
→
Date/Time
.
Set date
Set time
Set time
zone
Set
daylight
saving
