45
non-alpha keys.
6. In “Virtual keys”, enter the time delay for “Delay To Send Key”. Characters
will be output in the speed as defined.
7. In “Virtual keys”, check “Enable Auto Enter”.
8. Define a value for “Auto Enter Timeout”. Tap “Set”. Tap OK.
9. In MS WordPad, turn to alpha mode. Press and hold a key. The alpha
characters are highlighted in a loop. Release the key. The character,
which was focused on will be printed after a period of time, according to
the auto enter timeout defined.
10. Tap “Load” to load the previous setting.
Screen
1. Tap Rotate Right. Screen rotates to the right.
2. Tap Rotate Left. Screen rotates to the left.
3. Tap Upside Down. Screen rotates upside down.
Ping
This tool allows you to ping to other devices in LAN network while your terminal
is connected to the network.
1. Tap “Ping” tab, on Host field, enter the IP address
of the device you want to ping to.
2. Check “Constant Ping” so that your terminal will
continuously ping to the remote device.
3. Tap “Start”. The terminal will search for the remote
computer with the IP address, which you entered.
If not found, you will see “Request Time Out”. If
the remote computer is found, you will see “Host
Responding”.
