27
2. Under
Main
tab, select the profile you want
to activate.
3. A pop-up window appears
“A Power Cycle is required to make settings
activate properly.
” Tap
OK
, and then tap
OK
to exit the Summit Client
Utility.
4. Tap
Start
→
Programs
→
Utilities
→
Boot-Mode
. Tap
Warm Boot
to warm start the terminal and load the previous settings.
5. The Summit icon on the taskbar indicating
the AP is connected.
Double tap this icon to bring up Summit
Control Utility. Tap
Disable Radio
, you can
disconnect the AP.
Under
Status
tab, you can see the IP
address, signal strength and quality.
If you want to learn more detailed settings of the SUMMIT utility, please visite
SUMMIT website (
http://www.summitdatacom.com/documentation.htm)
.
Bluetooth Connection
Your device is provided with Bluetooth wireless technology that you can use
to synchronize information with a computer equipped with a Bluetooth adapter
or access point. Bluetooth wireless technology allows you to communicate
with the computer whenever it is within a range.
You may use BTMAN, which will be described, to enable the Bluetooth
module.
