Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
23
TYP
This command displays the contents of a file on
the HT630’s LCD. The contents of the file will be
displayed 128 (16 characters x 8 lines) characters
at a time.
Press any key to show the next page or hit
to return to the User Mode Prompt. If you try to display a program
or binary file, you may only see unintelligible characters.
CPY
This command allows users to make a copy of data from a source
device to a destination device. The source device may be a file,
COM (serial input), CON (keypad), and the destination device may
be a file, COM (serial output), CON (LCD display).
Source
Dest
Function
file1
file2
Copy file1 to file2
file1
COM
Output content of file1 to serial port
file1
CON
Output content of file1 to LCD
COM
file2
Input data from serial port and store in file2
CON
file2
Input data from keypad and store in file2, press
to end the data input
SET
This command allows users to set system date
and time, assign laser features and allow the
display of the power-on logo
(see next section)
.
<TYPE FILE>
SCAN.DAT
<SYSTEM SETUP>
1.DATE
&
TIME
2.SCANNER
3.DISPLAY
4.KEYPAD
5.EXIT
