Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
15
Numeric Mode
The HT630 keypad is set to Numeric Mode after being powered on. In Numeric Mode,
the cursor is a block and the keypad is mainly used to input numeric data and use the
four function keys ( ).
COMMAND Mode
Press the command
key to set the keypad to Command Mode. In Command
Mode, the cursor sign is still the same and the keypad is mainly used to input special
characters, make hot-key functions, and use F5-F8 as function keys.
ALPHA Mode
Press the alpha key to toggle between Numeric Mode keypad and Alpha Mode
keypad. In the Alpha Mode, the cursor is an underscore sign and the keypad is
available to input upper case letters. In Alpha Mode, every numeric key contains three
individual characters. You need to press the key once to get the first character, twice
to get the second character and three times to get the third character.
For example:
• First press alpha
key to switch the system to Alpha Mode, the cursor type
will be changed from block to underscore.
• To enter ‘A’, press
once.
• To enter “B”, press
twice.
• To enter “C”, press
three times.