background image

                  

HT630 Product Reference Guide

 

 

1.7 Using the Keyboard 

 
The keypad of the HT630 consists of 27 rubber keys; the keyboard is configured into three different modes: 

numeric mode

command mode

, and 

alphabetic mode

.  All keys except 

 key make sound (tone) when 

pressed. Keys of upper four rows have larger size for easier key-pressing to input numbers. 

 [ 

]

 

To turn on the unit, you need to press 

 key. To turn off the unit, you will need to press and to 

hold 

 key for one second. 

[CMD]

 Press 

[CMD]

 key and the desire command key (located at the end of the keypad) to set the 

keyboard to output command functions 

[ESC]

 In 

the 

Command

 or the 

Supervisor mode

, press 

[ESC] 

key to get back to the pervious menu. 

 

Laser trigger 

Numeric Mode 

Press C the 
desire command key 

Command 

Mode 

Press [Alpha]  

Alphabetic mode

Press [Alpha] 

Press C the 
desire command key 

Command

Alpha  

Numeric 

Figure 0-9: HT630 Keypad Legend

 

Numeric mode 

 

The HT630 keyboard is initialized to normal mode after being powered on. In normal mode, the cursor is a 
block and the keyboard is mainly used to input numeric data and use F1-F4 four function-keys. 
 

COMMAND mode 
 

Press [CMD] key to set the keyboard to command mode. In command mode, the cursor sign is still same 
and the keyboard is mainly used to input special characters, make hot-key

 

function, and use F5-F8 four 

function-keys.  

 

ALPHA mode 
 

Press [ALPHA] key to toggle between normal mode keyboard and alpha mode keyboard. In the alpha 
mode, the cursor is an underscore sign and the keyboard is available to input upper case letters. In the 
alpha mode, every numeric key contains 3 characters individually. You need to press the key once to get 
the first character, twice to get the second character and 3 times to get the third character.    The characters 
cycles back to the first character again. 

 

For example: 
 

First press [ALPHA] to switch the system to the alpha mode, the cursor type will be changed from block to 
underscore 
To enter ‘A’, press the key “A” once 
To get “B”, press the same key twice 
To get “C”, press the same key 3 times. 

 

 

Summary of Contents for HT630




















Reviews: