HT630 Product Reference Guide
TYP
This command dumps the content of a file on the terminal's LCD. The content of the file will be
displayed 128 (16 character x 8 line) characters at a time. Press any key to show the next page or hit
[CMD] then [ALPHA] keys to return to
User mode prompt
. If you try to display a program or binary file,
you may only see unintelligible characters.
< TYPE FILE >
SCAN.DAT
CPY
This command allows users to make copy of data from a source device to a destination device.
The source device may be a file, COM (serial input), CON (keyboard), and the destination device
may be a file, COM (serial output), CON (LCD display).
Source Dest. Function
file1
file2
copy file1 to file2
file1
COM output content of file1 to serial port
file1
CON output content of file1 to LCD
COM
file2
input data from serial port and store in file2
CON
file2
input data from keyboard and store in file2, press
[CMD]
and then
[ALPHA]
key
to end the data input
SET
This command allows users to set
system date and time, assign laser
feature and enable to display power-on logo
(see next section).
3.3 Configure the Terminal in SET command
There are three categories of general system configuration available in
SET command. Select the corresponded number, 1-3, to set system
date/time, assign scanning feature and enable power-on Logo display. Hit
[CMD] then [ALPHA] keys to return to
User mode prompt
.
<SYSTEM SETUP>
1. DATE & TIME
2. SCANNER
3. DISPLAY
4. KEYPAD
5. EXIT
3.3.1 DATE & TIME:
Setting system clock & calendar
When selects “
1.DATE & TIME
” in
SET command menu
, the screen as right
will be shown on the terminal LCD and let you set the system date and time of
Real Time Clock chip (RTC). The system date and time can be retrieved in
application and used as time stamp for data collection.
DATE-TIME
SETUP
1998/01/01
08:00:00
The second line shows the current date in the format YYYY/MM/DD
(year/month/day). If you want to reset the system date to January1 1997, then enter
[1][9][9][7],[0][1],[0][1]. Or press [ENT] key to skip the system date setting.
<SYSTEM SETUP>
1.DATE & TIME
2.SCANNER
3.DISPLAY
4.KEYPAD
5 EXIT
The third line shows the current time. The way to set system time is similar to set system date described
above. The format of system time is expressed in 24 hour of HH:MM:SS (hour:minute:second).
