background image

 

HT1 1D Batch User’s Manual 

1.4.2 Charging the Battery 

Before you turn on and start using this device, it is recommended that you 

charge the battery. 

If the battery has been discharged for several days, you may need to charge 

for several minutes before powering it on. 

Use only the adapter and the USB cable that came with this device to charge 

the battery. When the battery power is too low, make sure to use the power 

adapter or put into the cradle to charge. 

NOTE !! : For first use, you must charge, at least for 3 seconds, 

the battery in the HT1. 

 

 

Charge with USB

 

Connect the micro USB cable to the USB port at the bottom of HT1 and plug 

into your PC's USB port to simultaneously charge the HT1. Or plug the AC 

power adapter into the electrical outlet on the USB plug. 

Note: AC power adapter is included in the package without cradle.   

 

 

 

       

 

                                                                               

© 2018 unitech Electronics Co., Ltd. All rights reserved.   

                                          unitech is a registered trademark of unitech Electronics Co., Ltd.

 

 

Summary of Contents for HT1 1D Batch



















































Reviews: