10
5.10.6 If there is no show on monometer when press down the
‘
pressure up
’
button, please make sure that the running direction of oil pump motor is all right,
normally it should run as clockwise. If the direction is converse, please exchange
any two wires of three-phase power supply to connect.
5.10.7 Press down the
“
Inching
”
button, lead the laminated paper to the front
separating roller, please see the drawing 1, then lift up the self-respecting roller to
the same level, move the hand wheel of front pressure roller to press the
laminated paper at last.
5.10.8 Place the decline wheel in right position as introduction of 5.9.1.
5.10.9 Adjust the distance between front and back rollers as introduction of 5.9.2.
5.10.10 Let the attached pressure bar press on the edge of paper, and makes paper
come through the wheel easily.
5.10.11 Press on the hand wheel of back separating roller, the laminated paper
will be separated automatically.
5.10.12 Adjust well the paper receiving table and ensure of the finished paper
coming down into the table.
6. Maintenance
6.1 The pressure must be loaded after starting the machine, and unloaded after
stopping.
6.2 The oil must be filtered before being injected into oil tank. Please do not to
open the oil tank without permission.
6.3 The oil temperature is not allowed to excess too high lest the oil be (the range
is 15--55
o
C) damaged.
6.4 Please exchange the working oil every 6 months, and also clean the oil tank.
6.5 Please do not adjust the safety valve on the tank at random. It
’
s Max. Pressure
is 21Mpa, adjusting this valve will change the Max. Pressure.
Paper thickness
pressure
80~127g/m
2
2MPa
127~250g/m
2
4MPa
250~350g/m
2
6MPa
Over 350g/m
2
Over 6Mpa
文件使用
"pdfFactory Pro"
试用版本创建
www.fineprint.cn
