background image

U N I T E C   R O U T E R  

 

 

 
 

 

RTR1003 

 

 

1

 

Unitec Linksys Router Configuration Guide 

 

Introduction 

If you intend to access the Portal, Sentinel or WashPay Site Server through the Internet, or if you 
want Unitec to be able to access your system remotely, you must install a router.  

Preparation Information 

Prior to installing the router, you MUST gather the following information from your Internet Service 
Provider (ISP) prior to beginning the installation. 



Note:

Your  Service  Provider  must  be  able  to  either  assign  you  a  static  IP  address,  or  use 
PPPoE for the following procedures to be effective.  

 

Static IP Address 

Your Static IP Address assigned by your service provider: 

________________________________________ 

Your Subnet Mask: 

________________________________________ 

Service Provider Gateway Address: 

________________________________________ 

Domain Name Service (DNS) Address: 

________________________________________ 

Secondary Domain Name Server (DNS) Address (If Applicable): 

________________________________________ 

PPPoE Information 

If  your  Service  Provider  uses  PPPoE  (for  example,  DSL),  you  will  need  your  User  Name  and 
Password. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for RTR1003













Reviews: