Unisys NX5820 K, Configuration Manual

Page: 21 / 176

7017 6300–005 1–1
Section 1
Introduction
How to Use This Guide
This guide provides the guidelines, procedures, and examples necessary to configure a
ClearPath Enterprise Server NX5820 and NX5820 K products.
For ClearPath Enterprise Server NX5820 and NX5820 K Enterprise Server (ES) product
line:
•
NX5821 models are single-domain systems with a single processor
•
NX5822 models are dual-domain systems containing either a single processor or multi-
processors per domain
All models include a single server, with a maximum of five servers per domain.
To configure your system:
•
Use this guide to configure the central system, up to and including the channel
interface
•
Use the
ClearPath Enterprise Server NX I/O Hardware Configuration Guide
(7008
6087) to configure the I/O subsystems from the channel interface outward
•
Read this introduction and the next section to gain familiarity with the system
architecture and system components
•
Use the remainder of the guide to configure a specific system
Adhering to the guidelines presented in this guide will enable you to correctly configure
the system and place a client order. For placing client orders, also refer to the Unisys
Configuration software system (UCON) used by sales support and salesperson to prepare
and configure Unisys computer products.
Note: The inclusion of items in this document does not guarantee their availability.
Refer to the
Unisys Worldwide Price Book
for an approved listing of products
available for purchase.