Unisys Aquanta CP Series, Configuration Manual

Page: 39 / 89

Configuring Your System
3814 9779–000 2–3
Changing the BIOS Settings
1. Press the right or left arrow key to highlight the name of the menu you want to
activate. When you highlight a menu name, it’s parameters appear on the screen.
2. Press the down or up arrow key to highlight the parameter you want to change.
3. Press the plus or minus key to change the value of the parameter.
Note: A black triangle next to an entry on a screen indicates that a submenu is
available to further define that parameter.
4. Press
Enter to
select a submenu parameter.
5. Press
Esc
to return to the previous menu.
Note: Item specific help appears on the right side of each BIOS screen.
Navigational tips appear at the bottom of each BIOS screen.
Exiting the BIOS Setup Utility
1. Highlight the Exit menu by pressing the right arrow key.
2. Highlight your preferred exit option by pressing the down arrow key.
3. Press
Enter.
Preloaded Software
When you ordered your system, you specified which software programs would ship
with your system and whether they would be preloaded onto the hard disk drive.
When you first turn on your system, it will attempt to launch the preloaded software
you specified when you placed your order. If the system does not indicate that it has
loaded the software, verify that you completed all hardware installation procedures
correctly and that all connections are firmly in place. If that doesn’t solve the problem,
reinstall the operating system software, following the procedures described in the
documentation that came with your operating system. If the system still does not
work, follow the troubleshooting instructions in Section 3.