Unisys Aquanta CP Series, Configuration Manual

Page: 25 / 89

Upgrading Your System
3814 9779-000 1–13
Removing SIMMs
To remove a preinstalled SIMM, complete the following steps:
1. Turn the system off. Disconnect the power cord and all peripherals.
2. Remove the system unit cover, as described earlier in this section.
3. Remove the front panel, as described earlier in this section.
4. Locate the SIMM retaining clips. Refer to Figure 1–5.
5. Release the retaining clips holding the SIMM in place.
6. Rock the SIMM away from the motherboard and lift it out of the socket.
Figure 1–5. Removing/Installing a SIMM
200% from scale
B1801_05