Unison Research
SH
39
moved from a cold to a warm place.
Keep all packing materials: every time you will need to transport the
SH
, its
original purpose-designed carton will provide the safest packing.
2.
INSTALLATION
The
SH
should be positioned in a safe place on a plane surface.
Adequate clearance must be left above and around the device to guarantee
correct ventilation.
We also suggest you leave enough free space behind your
SH
to allow the
connecting cables sufficient room to bend without crimping or strain, and
we strongly recommend not placing the device directly onto a power
amplifier or, in general, close to a heat source.
3.
CONNECTION TO THE MAINS
The
SH
is set at the factory to the appropriate mains voltage of the country
it will be shipped to.
IMPORTANT!
The voltage setting may not be changed.
Never connect the
SH
to AC mains if the local voltage doesn’t match
the value indicated on the rear panel!
The mains fuse is located in the fuse-holder integrated in the IEC mains
socket.
IMPORTANT!
Always replace fuses with new ones of the same type and
value.
Summary of Contents for SH
Page 1: ......
Page 36: ...Unison Research SH 36 Figura 27...
