Digital Video Network Surveillance System
Unisight Digital Technologies, Inc
47
Clear part of motion area:
Move the yellow pane to the start clear position of
motion area, press [EDIT], you will find the yellow pane is turned into black pane.
You can use [
↓
] [
→
] key to enlarge or shrink the blue area. Press [EDIT] key to clear
this part motion area.
Press [Enter] key to save and return “Image” menu. Press [ESC] to cancel.
Clear all motion areas:
Press [A] key to clear all motion areas of this channel.
The keys used to setup motion areas are following:
z
[
↑
][
↓
][
←
][
→
]: Move yellow panel to any position;
z
[EDIT]:Yellow panel and red panel switch key:;
z
[
→
]: Right enlarge red pane;
z
[
←
]: Left shrink red pane;
z
[
↓
]: Down enlarge red pane;
z
[
↑
]: Up shrink red pane;
z
[PTZ]: Set whole screen as motion area;
z
[A]: Clear all motion areas;
z
[ENTER]: Save and return “Image Setup” menu;
z
[ESC]: Cancel setup and return “Image Setup” menu;
Step 5: Motion alarm policy:
Move “Active Frame” to the corresponding
“Policy” button of motion detection alarm, press [ENTER] key to enter “Motion
Alarm Handle” menu: Shown as Fig.5.19 below
Fig. 5.19 Motion alarm handle setup
Step 6: Motion alarm record channel setup:
When there is motion alarm
happened, you can trigger related camera to start to record. In “Motion Alarm