Digital Video Network Surveillance System
Unisight Digital Technologies, Inc
45
Fig. 5.17 Video signal loss handle setup
Step 4: Setup alarm schedule:
You can setup working schedule. Only when the
video loss is happened in the schedule, DVR will response.
Note: The 4 time periods can not be repeated. Please reboot DVR to make
parameters become effective.
Step 5: Setup alarm policy:
You can select one or more response solutions,
including “On Screen Warning”, “Audible Warning”, “Upload to Center” and
“Trigger Alarm Output”. You can use [
↑
] [
↓
] and [EDIT] key to enable or disable
them. “×” is disable and “
9
” is enable.
Step 6: Save alarm setup:
After your setup, press “Confirm” button and return
“Advanced setting” interface. Press “Confirm” button to save current camera
parameters and return main menu.
Step 7: Save all cameras:
If you want to setup other cameras, please repeat from
step2 to step 6. In “Camera” menu, press “Confirm” key to save all cameras
parameters. Press “Cancel” button or [ESC] key to abort.
5.10 Motion Detection
If you enable this function, when there is motion being detected, DVR will
display alarm in the status bar on the screen.
