Digital Network Video Surveillance System
Anti-dither: Here you can set anti-dither time.
Show message: System can pop up a message to alarm you in the local host screen if you enabled this
function.
Alarm upload: System can upload the alarm signal to the network (including alarm centre) if you
enabled current function.
Send email: System can send out email to alert you when alarm occurs.
MMS: Highlight the icon to enable this function. System can send out a message to the user once an alarm
occurs.
Record channel: you can select proper channel to record alarm video (Multiple choices). At the same time
you need to set alarm record in schedule interface (Main Menu->Setting->Schedule) and select schedule
record in manual record interface (Main Menu->Advance->Manual Record).
Latch: Here is for you to set proper delay duration. Value ranges from 10 to 300 seconds. System
automatically delays specified seconds in turning off alarm and activated output after external alarm cancelled.
Tour: Here you can enable tour function when alarm occurs. It is a one-window tour: Please go to chapter
5.3.9 Display for tour interval setup.
Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm occurs.
For snapshot operation, please refer to chapter 4.4.2.
Please highlight icon
to select the corresponding function. After setting all the setups please click
save button, system goes back to the previous menu.
Figure 4-27
Unisight Digital Technologies, Inc.
49
