Digital Network Video Surveillance System
Figure 4-26
Alarm Setup and Alarm Activation
Before operation, please make sure you have properly connected alarm devices such as buzzer.
Go to Alarm Setup Interface
In the main menu, from Setting to Alarm, you can see alarm setup interface. See
X314H314H314H
Figure 4-23.
Alarm Setup
Alarm interface is shown as below. See
X314H314H314H
Figure 4-23.
Alarm in: Here is for you to select channel number.
Event type: There are two types. One is local input and the other is network input.
Type: There are two modes: normal open/ normal close. In normal open mode, system can generate an
alarm when it connects to the high level. In normal close mode, system is always in the alarm status. The alarm
ends when it connected to the high level.
Overlay: Highlight the icon to select this function. System can overlay the vehicle running status it gets.
Please note this function is for alarm input channel 2 to channel 6.
Information: System can get corresponding vehicle information via the alarm input and output port. It
includes: front door, back door, left-turn light, right-turn light, brake light, running status (speed measurement).
Overlay: It has two modes: Mode 1: After you enable the corresponding setup, it can overlay the
character information to the OSD. Mode 2: After you enable the corresponding setup, it can overlay the
character information to the recorded file so that you can view when you search or playback.
Period: Click set button, you can see an interface is shown as in
X316H316H316H
Figure 4-24. Here you can set for
business day and non-business day. In
X317H317H317H
Figure 4-24, click set button, you can see an interface is shown as in
X318H318H318H
Figure 4-25
X
. Here you can set your own setup for business day and non-business day.
Unisight Digital Technologies, Inc.
48
