6.
Switch between upper-case and
lower-case input mode: If you are in
lower-case input mode, press
key This way you can turn to upper-
case input mode , LED 5 will blink at an interval about 1 second. In order to
return to lower-case input mode pressing the key again after you
completed your upper-case input, the LED 5 goes out. Every time, completed
your upper-case input, please switch to lower-case input mode immediately, if
waiting for the device enters sleep mode, LED 5 status will be incorrect.
7. When LED 4 lights up this indicates your battery voltage has a low charge and
needs to be recharged. The Unisen
iPazzPort
is equipped with a re-
chargeable battery. Unisen has supplied you with a USB cable, which is
plugged into a vacant USB slot on your computer and the bottom of the
iPazzPort
, as indicated by arrow 8 above. During charging LED 1 & 2 will
light up with a steady on. When fully charged LED 1 will turn off. Please
unplug the
iPazzPort
from the USB cable. LED 2 will then turn off and your
battery is now fully charged.
8. The
iPazzPort
will work with a low battery charge (LED 4 only lit up) but if
LED 3 and LED 4 are both lit up you should re-charge battery as described
above. The backlight feature of the keyboard draws more power so take care
when you battery indicators both light up. The unit becomes unstable when
the battery lights are both on.
9. If you wish to operate this
iPazzPort
in a darkened room then you will want to
use the Backlight Keyboard feature. In order to activate the Backlight feature
please double press.
10. The Touch Mouse Pad (TMP) is quite versatile. To create input with the
TMP place your finger on the pad. Just move your finger on the TMP as
though you were using your mouse pad. Watch the mouse move to where
you want it, then use the keyboard for whatever action you desire. You can
