U G P 1 0
27
Door Removal & Reversal Instructions
This appliance has the capability of either opening the door from the left or right side.
The unit is delivered to you with the door opening from the left side, to the right.
Should you desire to reverse the opening direction, please follow these instructions
(refer to drawing on the following page).
NOTE:
All parts removed must be saved to do the re- install the door.
• Remove the hinge cover on the right top of the cabinet.
• Remove the three bolts and washers (using a ratchet tool with a 8MM socket) that
holds the top hinge to the cabinet. Keep these for later use.
• Lift the top hinge straight up to free the pin from the socket on the top of the door.
• Lift the freezer door and place it on a padded surface to prevent scratching.
• Remove the plug buttons from the upper left holes as illustrated and transfer them to
the uncovered holes at the right side. Be sure to press the plug buttons firmly into the
holes.
• Unscrew the middle hinge and washer with a Torque or flathead screwdriver. Keep
these for later use.
• Take off the refrigerator door and place it on a padded surface to prevent scratching.
• Unscrew the lower hinge. Push the kick plate to the right in the new position.
• Lay the appliance on its side. Remove, change and replace the bottom hinge and
plugs to the opposite side.
• Stand the unit upright and replace the refrigerator door.
• Insert the bottom of the middle hinge into the top of the refrigerator door. With the
door open, screw the middle hinge into the uncovered holes. Do not tighten screw
until you have checked that the door is level.
Chapter
7
