Unique PRESTIGE UGP-20V PC1 B Installation And Owner'S Manual Download | Manualshive

Page: 6 / 55

background image

6

Welcome & Congratulations

Congratulations on your purchase of a UNIQUE range! We are very proud of our product – and
are completely committed to providing you with the best service possible. Your satisfaction is
our #1 priority. Please read this manual very carefully. It contains valuable information on how to
properly maintain your new Unique gas range.
We know you will enjoy your new range and Thank You for choosing one of our Unique Gas
Products! We hope you will consider us for future purchases.

IMPORTANT PRECAUTIONS AND RECOMMENDATIONS

This appliance is designed and manufactured solely for the cooking of domestic (household)
food and is not suitable for any non-domestic application and therefore CANNOT be used in a
commercial environment.
The appliance guarantee will be void if the appliance is used within a non-domestic environment
i.e. a semi commercial, commercial or communal environment..

PLEASE READ AND SAVE THESE INSTRUCTIONS

This manual provides specific operation instructions for your model. Use your range only as

instructed in this manual. These instructions are not meant to cover every possible condition and

situation that may occur. Common sense and caution must be practiced when installing, operat-

ing and maintaining the appliance
Record in the space provided below the Model No. and Serial No. of this appliance.
These numbers are found on the serial plate located at the back of the range.

Model No. ________________________ Type Number _______________________
Serial No. ________________________ Purchase Date________________________
Record these numbers for future use.
IMPORTANT:

Keep a copy of your bill of sale. The date on the bill establishes the warranty

period should service be required. If service is performed, it is in your best interest to obtain and
keep all receipts.

PLEASE DO THIS NOW!

The PRODUCT REGISTRATION CARD should be filled in completely, signed and
returned. This information will register your product and help us to serve you quickly in
the future if necessary.

«
...
4
5
6
7
8
...
»

Summary of Contents for PRESTIGE UGP-20V PC1 B
























































Reviews:

No comments

Related manuals for PRESTIGE UGP-20V PC1 B

Brand: Maytag Pages: 41

Heritage Pro HGPR30S

Brand: Dacor Pages: 3

Millennia MRES30S

Brand: Dacor Pages: 12

Brand: Dacor Pages: 14

Distinctive DR30E

Brand: Dacor Pages: 20

Distinctive DR30D

Brand: Dacor Pages: 24

Brand: Dacor Pages: 3

Epicure ER30GSCH

Brand: Dacor Pages: 2

Brand: Dacor Pages: 2

Brand: Dacor Pages: 5

Brand: Garland Pages: 2

Brand: Jenn-Air Pages: 9

Brand: Amana Pages: 52

Brand: Amana Pages: 16

Brand: GE Pages: 40

Brand: GE Pages: 2

Brand: Electrolux Pages: 5

EI30GF55GB - 30 Inch Gas Range

Brand: Electrolux Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands