30
Lighting the Top Burners
1. To obtain a flame more easily, light the burner before placing a cooking
utensil on the burner grate.
2. Decide which burner you’re igniting first using the screened diagram below
the burner knob. The black dot indicates the position of the burner you’re
igniting.
3.To light a burner, press the burner knob in and turn counter clockwise to
high flame/ignition position. You will hear the electronic ignition clicking as
you continue to hold the knob down until the flame lights. Once the burner
is lit, hold in for a few extra seconds to warm up the thermocouple so the
electromagnet in the burner valve stays in the open position once you release.
4. After lighting the flame, turn the control knob to adjust the flame size as
required.
Choice of Burner
DIAMETERS OF PANS WHICH MAY BE USED ON THE TOP BURNERS
BURNER
MINIMUM
MAXIMUM
Auxiliary
4” 23/32 (12 cm)
5” 1/2 (14 cm)
Semi-rapid
6” 19/64 (16 cm)
9” 7/16 (24 cm)
Rapid
9” 7/16 (24 cm)
10” 15/64 (26 cm)
Do not use pans with concave or convex bases
OPERATION OF RANGE
Summary of Contents for PRESTIGE UGP-20V PC1 B
Page 21: ...21 WALL CLEARANCES continued ...
Page 46: ...UGP 20V PC1 S S WIRING DIAGRAM 46 ...
Page 54: ...NOTES 54 ...
