Unique Klasse DPA-246LG, Service Manual

Page: 5 / 79

3
2. INSTALLATION GUIDE
· ·
Flat and strong place in the room
· No obstacles in front of air in/out grille
· Easy place to connect drain hose to outside of room
· Easy place to connect copper tube with outdoor unit
·
Secure enough distance from neighboring objects as
shown below.
·
Secure enough distance from neighboring objects as
shown below.
·
A place no reach of direct ray of sun (if necessary, shield the
light)
· No obstacles in front of air in/out grille
· A place having a drain out-let
·
Easy place to connect copper tube with indoor unit
·
Secure enough distance from neighboring objects as shown
below.
CAUTION : Do not hang the outdoor unit on the wall of building, in case of falling, it may cause a serious trouble and damage.
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
CAUTION
·
Use designated diameter and thickness of tube.
·
Connect all tube as short as possible and fix firmly.
·
Less than 3M of the difference of height between indoor and outdoor unit is desirable.
· Fill up more refrigerant if the connection tube is longer than 5M (30g/M).
(The refrigerant volume filled from the factory is suitable for 5M connection)
·
Be careful not to let in any dust or motes into the tube when the tube passes the wall.
·
When insulating the connection, use foam rubber or equivalent.
Secure enough space from the neighboring objects as shown below.
This is required to operate the unit efficiently.
·
·
·
·
·
·
·
·
·
·
·
30cm
70cm
30cm
70cm
(Outdoor unit)
5cm
(Indoor unit)
100cm
5cm
wall
indoor unit
outdoor unit
·
·
·
·
·
·
INSTALLATION PLACE
1
SPACE TO INSTALL
2