10
Tighten 4 seat frame bolts.
Be careful not to over tighten!
On side with Lever, open lever, slide tube
through tie strap. (The tie strap will prevent
lever from coming off and getting lost.)
DO NOT cut tie strap, it stays on.
Unique Inventions Inc.
559 Chamberlain St.
Peterborough, ON CANADA
www.uniqueinventionsinc.com
Assembly Instructions
Rev 2X
Out of the Box Bucket &
Blade assembly
1.
Telescoping nose option
2.
Place Blade assembly on bucket as shown and
slide frame tubes in.Frame tubes are marked left
and right. If you are receiving more than one sled
they will have numbers on them.
3.
Once you have installed the frame
tubes Slide the nose in and install pins
this aligns the tube holes to the tele-
scoping nose holes
Now tighten the bolts on the seat
frame. See next picture.
4.
5.
NOT TO BE USED AS A SNOW SLED
Tools Required:
7/16” Wrench (Qty 2) ~
For tightening seat frame and blade holder
1/2” Wrench ~
For U Bolt
3/16” Allen Wrench (Qty 2) ~
For Removing skate blades
If you have a standard nose (not telescoping) you will also need:
3/8” Wrench
5/32” Allen Wrench
Applicable for Rev Force 1
& Goalie Sledges
