bath
o
vision - installation manual
page 4
of the mirror. Check the audio output to speakers. When satisfied that all connections
have been made and secured and that the TV is operating correctly, the silicon sealant
is ready to be applied to the rear of the mirror. At this point switch off the television and
switch off the mains electricity supply to the television.
Figure 2.
Seal
5.
It is recommended that a support for the mirror television is provided to enable ease
of working. A bead of the special silicon sealant provided should be applied continuously
around the rear surface of the mirror and close to the edge of the mirror. Use in accord-
ance with the instructions on the sealant. It is important to provide sufficient silicon seal-
ant to ensure a complete and continuous seal between the wall (or tiles) and rear of the
mirror. The silicon sealant must fully protect the body of the television mounted on the
rear of the mirror from water, steam or humidity of any kind.