bath
o
vision - installation manual
page 2
Introduction
1.
To make sure the bathovision™ TV works correctly and safely please follow this
installation manual that will guide you through the installation process. Once correctly
installed and sealed the bathovision™ will give you hours of luxury viewing. If you experi-
ence any difficulty with the installation please contact our customer services department
who will be pleased to help.
Prepare the wall cavity cutout
2.
Figure 1.
Prepare a cavity cutout in the wall where you wish to install the television. The cav-
ity cutout dimensions vary according to size of bathovision™ TV being installed and on
the securing method chosen by the installer. Accurate wall cavity cutout dimensions are
important
As a guidance only, the table below sets out the minimum and maximum dimensions
of the cavity cutouts needed for the different bathovision™ models and the different
vertical positions of the TV inside the cavity. Maximum height 1 refers to the installation
where the device is vertically centred in the cavity, whereas maximum height 2 refers to
the installation where the TV rests on the bottom of the cavity cutout. However, it is up
to the installer to judge what installation method is suitable given the site conditions. A
centrally mounted TV will require a suitable spacer to be provided by the installer to raise
the base of the TV such that it is centralised in the cavity cutout.