Unipulse F805AT-BC, Operation Manual

Page: 87 / 202

6.SETTING AND ADJUSTMENT OF READING
72
6-5-13. Trigger CH select
Use this menu item to select trigger source channel when LEVEL is selected in
[GRAPHIC MODE].
The calculated data specified in SPLIT SELECTION in the selected channel is used for
triggering.
Operation
6-5-14. Split selection
Use this menu item to define the number of channels to be displayed.
Operation
6-5-15. Disp. partition Ch1/Ch2/Ch3
Use this menu item to select the data to be displayed graphically.
Ch1 data is displayed in the top pane of the divided graph screen. If “NO SPLIT” is
selected in [SPLIT SELECTION], ch1 data is displayed in the whole graphic screen.
Ch2 data is displayed in the second pane of the divided graph screen. This item is
ignored if “NO SPLIT” is selected in [SPLIT SELECTION].
Ch3 data is displayed in the bottom pane of the divided graph screen. This data is
displayed only when “3 SPLIT” is selected in [SPLIT SELECTION].
Operation
Options: ch1, ch2, ch3
MODE GRAPH SETTING → → PAGE TRIGGER CH SELECT →
Options: NO SPLIT, 2 SPLIT, 3 SPLIT
MODE GRAPH SETTING
→ →
PAGE DISP PARTITION SEL
→
Options: BELT SPEED, WEIGHT DENSITY, FEED RATE,
LOAD RATIO, FEED RATIO, CONTROL RATE
MODE GRAPH SETTING → → PAGE DISP PARTITION CH1 →
MODE GRAPH SETTING → → PAGE DISP PARTITION CH2 →
MODE GRAPH SETTING → → PAGE DISP PARTITION CH3 →