Unipulse F372A, Operation Manual

Page: 27 / 30

11.Command List
24
11.
Command List
Classification of items Item
Command
No.
Setting range
Work Setting
WORK0 to 15
Comparison
Setting
HI Limit / HI-A Limit 0 1 0 1 -99999 to 99999
LO Limit / LO-A Limit 0 1 0 2 -99999 to 99999
HH Limit / HI-B Limit 0 1 0 3 -99999 to 99999
LL Limit / LO-B Limit 0 1 0 4 -99999 to 99999
Hysteresis 0 1 0 5 0 to 9999
Alarm HI Limit 0 1 0 6 -99999 to 99999
Alarm LO Limit 0 1 0 7 -99999 to 99999
Near Zero 0 1 0 8 0 to 99999
Comparison Timing / Comparison
Timing A / Relative Comparison Timing
0 1 0 9 0: ALL, 1: MD, 2: NZ, 3: MD+NZ, 4: HOLD
Comparison Output Selection 0 1 1 0 0: H4/L0, 1: H3/L1, 2: H2/L2, 3: H1/L3, 4: H0/L4
DF-HI Limit 0 1 1 1 -99999 to 99999
DF-LO Limit 0 1 1 2 -99999 to 99999
Before Value Regulation 0 1 1 3 0 to 99999
Before Value 0 1 1 4 -99999 to 99999
Comparison Timing B / Relative Comparison Timing 0 1 1 5 0: ALL, 1: MD, 2: NZ, 3: MD+NZ, 4: HOLD
Comparison Standard 0 1 1 6 0: Hold A, 1: Hold B
RL-HI Limit 0 1 1 7 -99999 to 99999
RL-LO Limit 0 1 1 8 -99999 to 99999
Hold Setting
Hold Mode 0 2 0 1 * 1, * 2
Hold Start Level 0 2 0 2 -99999 to 99999
Section Time 0 2 0 3 0.001 to 9.999 sec
Level Condition 0 2 0 4 0: Passed, 1: Passed HI, 2: Passed LO
Hold Auto Reset 0 2 0 5 0: OFF, 1: ON
Sample Removal Value 0 2 0 6 -999 to 999
Hold Stop Level 0 2 0 7 -99999 to 99999
Average Sample Number 0 2 0 8 1 to 999 Times
Inflection Minimum Slope 0 2 0 9 1 to 99999
Inflection Front Slope Time 0 2 1 0 10 to 990(However, F Slope Time + R Slope Time < 1000)
Inflection Rear Slope Time 0 2 1 1 10 to 990(However, F Slope Time + R Slope Time < 1000)
Inflection Removal Value 0 2 1 2 -999 to 999
Detection Start Condition 0 2 1 3 0: Ext+Level, 1: Ext Only
Relative Minimum Count 0 2 1 4 1 to 99999
Relative magnification 0 2 1 5 * 4
Hold Section
0 2 1 6 * 3
Sample Trigger Select 0 2 1 7 0: ON Edge, 1: OFF Edge
Graph Setting
Graph Mode 0 3 0 1 0: Continued, 1: Ext, 2: Level, 3: Ext+Level
Y(LD) Start Point 0 3 0 2 -99999 to 99999
Y(LD) End Point 0 3 0 3 -99999 to 99999
X(TM) End Point 0 3 0 4 0.1 to 99.9 sec
Graph Start Level 0 3 0 5 -99999 to 99999
Interval Time 0 3 0 6 0.0 to 99.9 sec
Level Condition 0 3 0 7 0: Passed, 1: Passed HI, 2: Passed LO, 3: Beyond, 4: Below
Pre Trigger Value 0 3 0 8 0 to 20 %