Unipulse F325 Operation Manual Download Page 81

Page: 81 / 160

System Settings and Operations

Syste

Settin

gs and

Ope

ratio
ns

Chapter

9-4.

I/O input check

The current condition of I/O input is displayed.
* In I/O input check display, the panel does not return to the

indicated value display even without key operation.

9-5.

I/O output check

Each bit of I/O output is turned ON and OFF.

* In I/O output check display, the panel does not return to the indicated value display even without

key operation.

* Output check will not be canceled even if the setting mode is switched.

A stationary output condition returns after all are completed.

9-6.

BCD input check

The current condition of BCD input is displayed.
* In BCD input check display, the panel does not return to the

indicated value display even without key operation.

A8 (HOLD)

A7 (DZ)

A9 (H.RESET)

1: ON

0: OFF

key

HOLD

Approx. 1.6 sec.

Approx. 0.8 sec.

Approx. 1.6 sec.

Approx. 0.8 sec.

All outputs ON

All outputs OFF

Only A2 (HI) ON

Only A3 (OK) ON

Only A5 (OUT1) ON

Only A6 (OUT2) ON

Only A4 (LO) ON

Back to a stationary output condition

I/O output start

B14 (logic switch)

A14 (BCD data hold)

1: ON

0: OFF

Summary of Contents for F325

































































































































































Search results

Summary of Contents for F325

Reviews:

Related manuals for F325

Brands by name

Popular brands

Unipulse F325, Operation Manual

Search results

Summary of Contents for F325

Reviews:

Related manuals for F325

Brands by name

Popular brands